xSNMP for SCOM 2012

31 Oct

Hi,

In the SCOM 2007 age we had a fantastic network management pack called xSNMP. Not only because it was free but also because it covered a lot of network devices that even now aren’t covered in SCOM 2012. But what happened ….

The Problem

SCOM 2012 was introduced and contained a brand new way to monitor network devices. This indirectly replaced the complete SNMP stack out of SCOM. Well not the complete SNMP stack but the discovery process was changed and not compatible with the old SNMP stack. I am not going into details if this is a good or bad thing but for the xSNMP mps it was RIP…. (as far as you didn’t do a SCOM 2012 upgrade)

Solution

.. or not …. I decided to take a couple of xSNMP MPs and redesign it to work in SCOM 2012.

For now I have changed the APC mp. Also the same for the Brocade MP and this one is now in the testing phase.
Since the complete xSNMP mps are community free I will share the compiled mps also for free. The source code I share later on.

Reminder: All the credits go to the original xSNMP devOps. I only redesigned it to work with SCOM 2012. So if it breaks down your environment don’t knock on my door ;-)))

You can download the MPs here:

Happy SCOMMING !!

Michel Kamp

https://michelkamp.wordpress.com

 

 

 

 

Advertisements

8 Responses to “xSNMP for SCOM 2012”

  1. Niko Gunadi October 31, 2014 at 16:40 #

    Fantastic work. Will try this. Probably, I also need to do the same for Cisco SAN Switches.

    Care to share how it works, maybe I can contribute also.

  2. Aengus November 3, 2014 at 02:10 #

    Thanks Michel!

    • Alexandre Pereira January 29, 2015 at 13:34 #

      Hi, very good work,
      can you send a unsealed management pack please. I need to change NetBotz and it dont work.
      Thank you so much

      Alexandre Pereira

  3. Joost May 5, 2015 at 12:00 #

    Hi Michel,
    Great MP’s have been looking for a while for something like these…

    Did you ever get the Brocade MP out of testing phase?

    • michel kamp May 6, 2015 at 10:25 #

      Hi Joost,

      No i didn’t. The reason is that i haven’t have any test environment. If you can deliver one I could continue to work on it .

      For example a jalasoft snmp emulation file or a remote snmp connection to the brocade or a SCOM AGENT connection ect..

      michel

  4. Ryan October 12, 2015 at 11:43 #

    Hi,

    So what was the process to convert these? there are few others I would like to bring in and would be interested to know what you did.

    Ryan

    • Anonymous October 12, 2015 at 11:49 #

      Hi,

      I stopped to convert them. I don’t have a test device. If someone can give one in can continue.

      For example a jalasoft snmp emulation file or a remote snmp connection to the brocade or a SCOM AGENT connection ect..

      Michel

      • Iwan December 8, 2015 at 16:43 #

        Hi,

        I want to use the sonicwall MP. is it possible to convert it? Or how can i do this?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: